Skid Mounted PSA Oxygen Generator , 150-200 Bar Chemical Oxygen Generator
Parameters
Oxygen purity: 90% - 95%
End pressure: 150 – 200 barG
Oxygen dew point: -60°C
Operating conditions: 5°C - 45°C
The process of oxygen generation plant
Oxygen Generator consist of two columns filled with molecular sieve(CarboTech AC Gmbh). Pre-treated compressed air enters the active column and follows up through the CarboTech. Nitrogen and the other gases are being adsorbed while the oxygen passes through. The active column is pressurized. When pressure is released, column becomes inactive and completely regenerate. In order to secure steady flow two columns are used, one is active while the other is inactive. At the end of cycle they switch roles.
Oxygen from oxygen generator enters oxygen buffer. From there regulated oxygen is fed into the high pressure oxygen compressor where the oxygen is boosted and fed the filling ramp where oxygen cylinders are filled.
Our comapct plant is built on the skid or frame with one central electric socket enabling quick start up. All components are already connected in the factory, so no extensive installation is required.
Application scope
1. Medical.The generator can be set up to fill the hospital pipeline directly and use the filling ramp as a backup system. Oxygen cylinders can be filled simultaneously or during hours with low consumption.
2. Metallurgy: For anneal protection, agglomeration protection, nitrogenizing, furnace washing and blowing, etc. Used in fields such as metal heating treatment, powder metallurgy, magnetic material, copper process, metallic mesh, galvanized wire, semiconductor, etc.
3. Chemical and new material industries: For chemical material gas, pipeline blowing, gas replacement, gas protection, product transport, etc. Used in fields such as chemical, urethane elastic fiber, rubber, plastic, tyre, polyurethane, biological technology, intermediate, etc.
4. Electronic industry: For encapsulation, agglomeration, anneal, deoxidization, storage of electronic products. Used in fields such as peak welding, circumfluence welding, crystal, piezoelectricity, electronic porcelain, electronic copper tape, battery, electronic alloy material, etc.
Main parts of nitrogen generator
| Project | Type | Quantity | Remark |
| PSA adsorption tower | Professional design | 2pieces/10kg | Special pressure vessel manufacturer |
| Molecular Sieve | MSC | 3500kg | Takeda Japan |
| Vortex airflow distributor | Professional design | 2 pieces | Technical Carbotech from Germany |
| Self complement compact device | Professional design | 2sets | Jiangyin Tongyue |
| single unit processing part | / | 1 set | SMC-Japan |
| Sample pressure reduce valve | / | 1 piece | SMC-Japan |
| Direct current 24V power | / | 1 set | Taiwan-Mingwei |
| Pneumatic valves Pneumatic valves | DN100 | 5 pieces | Burkert Germany Burkert Germany |
| DN50 | 4 pieces |
| DN20 | 1 pieces |
| Magnetic valve | 4V210-24V | 10 pieces | Taiwan Airtac |
| Metal flow meter | LZZ-50 | 1 piece | Changzhou Shuanghuan |
| Control system | TPC7062K | 1set | (color touch screen )Kunlun Tongtai |
| Muffler | TY-500X | 1 set | Jiangyin Tongyue |
| Pipe valve system | bprofessional produce | 1 set | Jiangyin Tongyue |
Export standard packing:
Product Tags:
|
|
Skid Mounted PSA Oxygen Generator , 150-200 Bar Chemical Oxygen Generator Images
|
